Archief - 2 x 1500Watt prof STROBO

Megastar Strobe MkII
The Anytronics Megastar Strobe MkII is
probably the most versatile linear tube strobe
on the market today. It is housed in a steel
enclosure complete with hanging bracket. The
strobe uses a 1500W linear tube together with
a mirror finished aluminium reflector for
maximum light output. Unlike some other
strobes on the market, the Megastar Strobe is
very quiet when it fires making it ideal for use
in theatre or studio environments where
background noise needs to be kept to a
minimum.
The strobe has its own internal oscillator with
speed adjustment for 1 – 10FPS and fully isolated
external inputs via two jack sockets.
A unique feature of all Anytronics Strobes is the
2 position ‘Flip Flash’ output. This is available from
a jack socket on the rear panel. This will give either
a 100mS delayed trigger pulse after the flash has
occured, or a simultaneous trigger pulse, by
simply operating the adjacent push button switch.
This pulse can be used to fire adjacent strobes.
When several units are coupled in a chain, a whip
effect can be created without using a complex
controller; the effect being controlled either by the
oscillator in the first strobe of the chain, or from
an external trigger source. This feature can be
used to create a wide variety of effects by different
arrangements of interconnecting leads. This
combined with its high light output makes it ideal
for special effects, such as lightning.
A 4th jack socket is fitted for connection to the
ESC (Extension Speed Control).
A considerable amount of heat is generated by
the tube in this high powered unit. A fan will be
activated by a thermal switch if the unit is used
frequently. In the event of fan failure or the unit
being used excessively and overheating, a further
switch will shut the unit down until an acceptable
temperature is reached.

Klik om te vergroten...

Megastar Technical Specification
Flash Tube Rating: 1500W
Flash Discharge: 70 Joules
Flash Speed Range: Internal oscillator 1 – 10FPS.
External source Max. 12.5FPS
External Trigger Input: 3 to 20V + or –
‘Flip Flash’ Output: Output Pulse 10V for 10mS occurs 100mS after flash or simultaneously
Mains Supply: Via 2m mains cable 200 – 240Vac 50 or 60Hz.
Also available: 100 – 120Vac 50 or 60Hz
Internal Mains Fuses: H.T. 5A HRC 5mm x 20mm.
Electronics 250mA QB 5mm x 20mm
Dimensions: Strobe 390mm x 460mm x 140mm.
Carton: 570mm x 570mm x 240mm
Net Weight: 6.75Kg
Gross Weight: 10Kg
Shipping Quantity: 1 unit per carton

Klik om te vergroten...

keeperke126 zei:

€50 voor 1, vandaag al opgehaald.

Klik om te vergroten...

BuZz.LiGhTYeAr zei:

dmx aanwezig?

Klik om te vergroten...