Foert
Legacy Member
mag weg wegens opruiming en inkrimping van de hobby..
Product Description
The Juniper Networks® SSG5 and SSG20 Secure Services Gateways are high- performance security platforms for small branch office and standalone businesses that want to stop internal and external attacks, prevent unauthorized access and achieve regulatory compliance. Both the SSG5 and SSG20 deliver 160 Mbps of stateful firewall traffic and 40 Mbps of IPsec VPN traffic.
Security: Protection against worms, viruses, trojans, spam, and emerging malware is delivered by proven unified threat management (UTM) security features that are backed by best-in-class partners. To address internal security requirements and facilitate regulatory compliance, the SSG5 and SSG20 both support an advanced set of network protection features such as security zones, virtual routers and VLANs that allow administrators to divide the network into distinct secure domains, each with its own unique security policy. Policies protecting each security zone can include access control rules and inspection by any of the supported UTM security features.
nieuwprijs : Juniper firewall: SSG5 ssg-5-sb-bt - Central Point
meer info: http://content.centralpoint.nl/objects/pdf/1347830719_1.pdf
Junos versie : Version 5.4.0r6.0
config:
Product Name: SSG5-Serial
Serial Number: 0162012008002277, Control Number: 00000000
Hardware Version: 0710(0)-(00), FPGA checksum: 00000000, VLAN1 IP (0.0.0.0)
Software Version: 5.4.0r6.0, Type: Firewall+VPN
Feature: AV-K
Compiled by build_master at: Fri Jul 20 19:44:32 PDT 2007
Base Mac: 001b.c0cf.b9c0
File Name: xxxxxxxxxxxxxxxxxxxxxxxxxxx, Checksum: 1cb4453a
, Total Memory: 128MB
enkele info's opgevraagd via serial cable:
ssg5-serial-> get memory
Memory: allocated 21887648, left 57507696, frag 104
ssg5-serial-> get license-key
Sessions: 4064 sessions
Capacity: unlimited number of users
NSRP: Disable
VPN tunnels: 25 tunnels
Vsys: None
Vrouters: 3 virtual routers
Zones: 8 zones
VLANs: 10 vlans
Drp: Enable
Deep Inspection: Enable
Deep Inspection Database Expire Date: Disable
Signature pack: Signature update key is missing
IDP: Disable
AV: Disable(0)
Anti-Spam: Disable(0)
Url Filtering: Disable
ssg5-serial-> get interface
A - Active, I - Inactive, U - Up, D - Down, R - Ready
Interfaces in vsys Root:
Name IP Address Zone MAC VLAN State VSD
serial0/0 0.0.0.0/0 Null 001b.c0cf.b9d5 - D -
eth0/0 0.0.0.0/0 Untrust 001b.c0cf.b9c0 - U -
eth0/1 0.0.0.0/0 DMZ 001b.c0cf.b9c5 - D -
bgroup0 192.168.1.1/24 Trust 001b.c0cf.b9cb - D -
eth0/2 N/A N/A N/A - D -
eth0/3 N/A N/A N/A - D -
eth0/4 N/A N/A N/A - D -
eth0/5 N/A N/A N/A - D -
eth0/6 N/A N/A N/A - D -
bgroup1 0.0.0.0/0 Null 001b.c0cf.b9cc - D -
bgroup2 0.0.0.0/0 Null 001b.c0cf.b9cd - D -
bgroup3 0.0.0.0/0 Null 001b.c0cf.b9ce - D -
vlan1 0.0.0.0/0 VLAN 001b.c0cf.b9cf 1 D -
null 0.0.0.0/0 Null N/A - U 0
ssg5-serial-> get config
Total Config size 3664:
set clock timezone 1
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "netscreen"
set admin password "nKVUM2rwMUzPcrkG5sWIHdCtqkAibn"
set admin auth timeout 0
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst
set zone "Untrust" block
unset zone "Untrust" tcp-rst
set zone "DMZ" tcp-rst
set zone "VLAN" block
unset zone "VLAN" tcp-rst
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet0/0" zone "Untrust"
set interface "ethernet0/1" zone "DMZ"
set interface "bgroup0" zone "Trust"
set interface bgroup0 port ethernet0/2
set interface bgroup0 port ethernet0/3
set interface bgroup0 port ethernet0/4
set interface bgroup0 port ethernet0/5
set interface bgroup0 port ethernet0/6
unset interface vlan1 ip
set interface bgroup0 ip 192.168.1.1/24
set interface bgroup0 nat
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface bgroup0 ip manageable
set interface bgroup0 dhcp server service
set interface bgroup0 dhcp server auto
set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126
unset interface bgroup0 dhcp server config next-server-ip
set interface "serial0/0" modem settings "USR" init "AT&F"
set interface "serial0/0" modem settings "USR" active
set interface "serial0/0" modem speed 115200
set interface "serial0/0" modem retry 3
set interface "serial0/0" modem interval 10
set interface "serial0/0" modem idle-time 10
set flow tcp-mss
unset flow no-tcp-seq-check
set flow tcp-syn-check
set console timeout 0
set domain foert.eu
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set dns host dns1 0.0.0.0
set dns host dns2 0.0.0.0
set dns host dns3 0.0.0.0
set dns ddns
set dns ddns enable
set address "Trust" "192.168.2.0/32" 192.168.2.0 255.255.255.255
set ike respond-bad-spi 1
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set url protocol websense
exit
set policy id 3 from "Trust" to "Trust" "192.168.2.0/32" "Any" "HTTP" permit log count
set policy id 3
exit
set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit
set policy id 1 disable
set policy id 1
exit
set policy id 2 from "Untrust" to "Trust" "Any" "Any" "ANY" deny
set policy id 2
exit
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set config lock timeout 5
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset add-default-route
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit
Product Description
The Juniper Networks® SSG5 and SSG20 Secure Services Gateways are high- performance security platforms for small branch office and standalone businesses that want to stop internal and external attacks, prevent unauthorized access and achieve regulatory compliance. Both the SSG5 and SSG20 deliver 160 Mbps of stateful firewall traffic and 40 Mbps of IPsec VPN traffic.
Security: Protection against worms, viruses, trojans, spam, and emerging malware is delivered by proven unified threat management (UTM) security features that are backed by best-in-class partners. To address internal security requirements and facilitate regulatory compliance, the SSG5 and SSG20 both support an advanced set of network protection features such as security zones, virtual routers and VLANs that allow administrators to divide the network into distinct secure domains, each with its own unique security policy. Policies protecting each security zone can include access control rules and inspection by any of the supported UTM security features.
nieuwprijs : Juniper firewall: SSG5 ssg-5-sb-bt - Central Point
meer info: http://content.centralpoint.nl/objects/pdf/1347830719_1.pdf
Junos versie : Version 5.4.0r6.0
config:
Product Name: SSG5-Serial
Serial Number: 0162012008002277, Control Number: 00000000
Hardware Version: 0710(0)-(00), FPGA checksum: 00000000, VLAN1 IP (0.0.0.0)
Software Version: 5.4.0r6.0, Type: Firewall+VPN
Feature: AV-K
Compiled by build_master at: Fri Jul 20 19:44:32 PDT 2007
Base Mac: 001b.c0cf.b9c0
File Name: xxxxxxxxxxxxxxxxxxxxxxxxxxx, Checksum: 1cb4453a
, Total Memory: 128MB
enkele info's opgevraagd via serial cable:
ssg5-serial-> get memory
Memory: allocated 21887648, left 57507696, frag 104
ssg5-serial-> get license-key
Sessions: 4064 sessions
Capacity: unlimited number of users
NSRP: Disable
VPN tunnels: 25 tunnels
Vsys: None
Vrouters: 3 virtual routers
Zones: 8 zones
VLANs: 10 vlans
Drp: Enable
Deep Inspection: Enable
Deep Inspection Database Expire Date: Disable
Signature pack: Signature update key is missing
IDP: Disable
AV: Disable(0)
Anti-Spam: Disable(0)
Url Filtering: Disable
ssg5-serial-> get interface
A - Active, I - Inactive, U - Up, D - Down, R - Ready
Interfaces in vsys Root:
Name IP Address Zone MAC VLAN State VSD
serial0/0 0.0.0.0/0 Null 001b.c0cf.b9d5 - D -
eth0/0 0.0.0.0/0 Untrust 001b.c0cf.b9c0 - U -
eth0/1 0.0.0.0/0 DMZ 001b.c0cf.b9c5 - D -
bgroup0 192.168.1.1/24 Trust 001b.c0cf.b9cb - D -
eth0/2 N/A N/A N/A - D -
eth0/3 N/A N/A N/A - D -
eth0/4 N/A N/A N/A - D -
eth0/5 N/A N/A N/A - D -
eth0/6 N/A N/A N/A - D -
bgroup1 0.0.0.0/0 Null 001b.c0cf.b9cc - D -
bgroup2 0.0.0.0/0 Null 001b.c0cf.b9cd - D -
bgroup3 0.0.0.0/0 Null 001b.c0cf.b9ce - D -
vlan1 0.0.0.0/0 VLAN 001b.c0cf.b9cf 1 D -
null 0.0.0.0/0 Null N/A - U 0
ssg5-serial-> get config
Total Config size 3664:
set clock timezone 1
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "netscreen"
set admin password "nKVUM2rwMUzPcrkG5sWIHdCtqkAibn"
set admin auth timeout 0
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst
set zone "Untrust" block
unset zone "Untrust" tcp-rst
set zone "DMZ" tcp-rst
set zone "VLAN" block
unset zone "VLAN" tcp-rst
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet0/0" zone "Untrust"
set interface "ethernet0/1" zone "DMZ"
set interface "bgroup0" zone "Trust"
set interface bgroup0 port ethernet0/2
set interface bgroup0 port ethernet0/3
set interface bgroup0 port ethernet0/4
set interface bgroup0 port ethernet0/5
set interface bgroup0 port ethernet0/6
unset interface vlan1 ip
set interface bgroup0 ip 192.168.1.1/24
set interface bgroup0 nat
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface bgroup0 ip manageable
set interface bgroup0 dhcp server service
set interface bgroup0 dhcp server auto
set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126
unset interface bgroup0 dhcp server config next-server-ip
set interface "serial0/0" modem settings "USR" init "AT&F"
set interface "serial0/0" modem settings "USR" active
set interface "serial0/0" modem speed 115200
set interface "serial0/0" modem retry 3
set interface "serial0/0" modem interval 10
set interface "serial0/0" modem idle-time 10
set flow tcp-mss
unset flow no-tcp-seq-check
set flow tcp-syn-check
set console timeout 0
set domain foert.eu
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set dns host dns1 0.0.0.0
set dns host dns2 0.0.0.0
set dns host dns3 0.0.0.0
set dns ddns
set dns ddns enable
set address "Trust" "192.168.2.0/32" 192.168.2.0 255.255.255.255
set ike respond-bad-spi 1
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set url protocol websense
exit
set policy id 3 from "Trust" to "Trust" "192.168.2.0/32" "Any" "HTTP" permit log count
set policy id 3
exit
set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit
set policy id 1 disable
set policy id 1
exit
set policy id 2 from "Untrust" to "Trust" "Any" "Any" "ANY" deny
set policy id 2
exit
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set config lock timeout 5
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset add-default-route
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit