breeeze
Legacy Member
Ik heb 2 van deze RAID controllers gekocht, maar gebruik er
uiteindelijk maar 1 van. Ik verkoop dus de overblijvende kaart, hij zit
nog in de ongeopende (bulk) verpakking. Prijs is minder dan de helft
van de nieuwprijs (= 550 euro, zie website Alternate). Excl.
Verzendkosten van 5,90 euro met Taxipost.
Promise Supertrak EX-8654 4-Port Internal & 4-Port External PCI-E
SATA II / SAS RAID controller, met CD, handleiding en low profile
bracket, inclusief SFF-8087 naar 4x SATA+POWER kabel. VMWARE
ESX 4.x compatibel.
RAID 0, 1, 1E, 6, 5, 10, 50, 60
Enkele foto's:
ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
Minimumprijs: 175 euro
Meeneemprijs: 195 euro
Wat meer uitleg:
Enterprise-Class RAID Reliability
SuperTrak EX SAS and SATA RAID controllers are stable, robust
platforms that can be trusted. Built on a leading edge hardware
design, supported by a RAID stack developed and refined over more
than 15 years, they incorporate a single chip solution for optimized
reliability with 512MB data cache onboard, an available 72 hour
battery backup module, and a x8 PCI-Express interface to the host.
The SuperTrak EX line of SAS and SATA RAID controllers, with RAID 5
and RAID 6 support, protects your mission critical data by delivering
the data protection features you expect from leadership solutions.
Features such as global and dedicated hot spares, RAID level
migration, media patrol, read check table, and bad sector remapping
offer the most reliable data protection solutions in their class.
Easy Management
The new web-based Promise Array Manager Professional (WebPAM™
PRO) makes SuperTrak RAID Controllers easy to manage for both
Windows and Linux environments through the browser-based
graphical user interface to create, delete, expand, and convert disk
arrays from anywhere in the world.
In the event of a drive or data channel failure, WebPAM PRO supports
an array of notification options including text and email, as well as an
audio alarm located directly on the STEX RAID controller.
Specifications:
Controller Configuration
• Four internal SAS/SATA ports at 3Gb/s
• Four external SAS/SATA ports at 3Gb/s
— One SAS SFF-8088 connector
— One SAS SFF-8087 connector
• 1.2Ghz Intel 81348 XScale I/O processor
• Onboard 512MB ECC DDR II memory
Hardware Features
• PCI-Express x8 host bus interface
• Hardware XOR engine to offload parity calculation
• Hardware RAID 6 accelerator
• Low-profile MD2 form factor
• Optional on-board battery backup unit for data retention up to 72
hours
Supported RAID Levels
• RAID 0 – Data striped across 1-16 drives for increased performance,
but no data protection
• RAID 1 – Mirrored pair of drives for data protection with increased
read performance
• RAID 1E – Data mirroring extended to maximize balanced
performance. Allows odd number drive mirroring
• RAID 5 – Striped parity on 3-16 drives, ultimate data protection,
capacity and performance balance
• RAID 6 – Double parity for maximum data protection on 4-16
drives; allows double drive failures without downtime or data loss
• RAID 10 – Mirrored pair of RAID 0 for double drive failure protection;
can be split into two RAID 0 sets
• RAID 50 – Striped multiple RAID 5 sets to improve performance and
provide additional data protection
• RAID 60 – Striped multiple RAID 6 sets to allow multiple drive
failures to achieve high-data availability
RAID Fault Tolerance and Robustness Features
• Multiple logical drive support enables combining different RAID levels
on one set of disks
• Read Check table to avoid data read errors
• PerfectRAID™ technology for error handling and recovery of fatal,
media and disk errors
• Support hot swap of failed drives and hot spares
• Automatic/Manual rebuild of hot spare drive
• Background initialization for instant drive availability
• Supports bad sector remapping
• Variable stripe block size support to meet various application
requirements
• Synchronization can be scheduled periodically for RAID data
consistency
Web-based Promise Array Manager
• Creates, deletes, expands, and converts disk arrays remotely
• Media Patrol and Redundancy Check scheduling
• Monitors drive, array, and enclosure status and provides online
event logging
• Email notification of drive, array, controller or enclosure events (e.g.
error or degrade conditions)
• Remote management based on industry standard CIM/WBEM
• Interface displays in 10 languages
• CLI support
• Remote firmware update
Operating System Support
• Microsoft Windows Vista, 2000, XP, Windows Server 2003, Windows
Server 2008
• Red Hat Linux, SuSE Linux, Miracle Linux, Fedora Core, Linux open
source driver (32/64-bit)
• FreeBSD, FreeNAS, VMware ESX 3.x, 4.x
uiteindelijk maar 1 van. Ik verkoop dus de overblijvende kaart, hij zit
nog in de ongeopende (bulk) verpakking. Prijs is minder dan de helft
van de nieuwprijs (= 550 euro, zie website Alternate). Excl.
Verzendkosten van 5,90 euro met Taxipost.
Promise Supertrak EX-8654 4-Port Internal & 4-Port External PCI-E
SATA II / SAS RAID controller, met CD, handleiding en low profile
bracket, inclusief SFF-8087 naar 4x SATA+POWER kabel. VMWARE
ESX 4.x compatibel.
RAID 0, 1, 1E, 6, 5, 10, 50, 60
Enkele foto's:
ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
Minimumprijs: 175 euro
Meeneemprijs: 195 euro
Wat meer uitleg:
Enterprise-Class RAID Reliability
SuperTrak EX SAS and SATA RAID controllers are stable, robust
platforms that can be trusted. Built on a leading edge hardware
design, supported by a RAID stack developed and refined over more
than 15 years, they incorporate a single chip solution for optimized
reliability with 512MB data cache onboard, an available 72 hour
battery backup module, and a x8 PCI-Express interface to the host.
The SuperTrak EX line of SAS and SATA RAID controllers, with RAID 5
and RAID 6 support, protects your mission critical data by delivering
the data protection features you expect from leadership solutions.
Features such as global and dedicated hot spares, RAID level
migration, media patrol, read check table, and bad sector remapping
offer the most reliable data protection solutions in their class.
Easy Management
The new web-based Promise Array Manager Professional (WebPAM™
PRO) makes SuperTrak RAID Controllers easy to manage for both
Windows and Linux environments through the browser-based
graphical user interface to create, delete, expand, and convert disk
arrays from anywhere in the world.
In the event of a drive or data channel failure, WebPAM PRO supports
an array of notification options including text and email, as well as an
audio alarm located directly on the STEX RAID controller.
Specifications:
Controller Configuration
• Four internal SAS/SATA ports at 3Gb/s
• Four external SAS/SATA ports at 3Gb/s
— One SAS SFF-8088 connector
— One SAS SFF-8087 connector
• 1.2Ghz Intel 81348 XScale I/O processor
• Onboard 512MB ECC DDR II memory
Hardware Features
• PCI-Express x8 host bus interface
• Hardware XOR engine to offload parity calculation
• Hardware RAID 6 accelerator
• Low-profile MD2 form factor
• Optional on-board battery backup unit for data retention up to 72
hours
Supported RAID Levels
• RAID 0 – Data striped across 1-16 drives for increased performance,
but no data protection
• RAID 1 – Mirrored pair of drives for data protection with increased
read performance
• RAID 1E – Data mirroring extended to maximize balanced
performance. Allows odd number drive mirroring
• RAID 5 – Striped parity on 3-16 drives, ultimate data protection,
capacity and performance balance
• RAID 6 – Double parity for maximum data protection on 4-16
drives; allows double drive failures without downtime or data loss
• RAID 10 – Mirrored pair of RAID 0 for double drive failure protection;
can be split into two RAID 0 sets
• RAID 50 – Striped multiple RAID 5 sets to improve performance and
provide additional data protection
• RAID 60 – Striped multiple RAID 6 sets to allow multiple drive
failures to achieve high-data availability
RAID Fault Tolerance and Robustness Features
• Multiple logical drive support enables combining different RAID levels
on one set of disks
• Read Check table to avoid data read errors
• PerfectRAID™ technology for error handling and recovery of fatal,
media and disk errors
• Support hot swap of failed drives and hot spares
• Automatic/Manual rebuild of hot spare drive
• Background initialization for instant drive availability
• Supports bad sector remapping
• Variable stripe block size support to meet various application
requirements
• Synchronization can be scheduled periodically for RAID data
consistency
Web-based Promise Array Manager
• Creates, deletes, expands, and converts disk arrays remotely
• Media Patrol and Redundancy Check scheduling
• Monitors drive, array, and enclosure status and provides online
event logging
• Email notification of drive, array, controller or enclosure events (e.g.
error or degrade conditions)
• Remote management based on industry standard CIM/WBEM
• Interface displays in 10 languages
• CLI support
• Remote firmware update
Operating System Support
• Microsoft Windows Vista, 2000, XP, Windows Server 2003, Windows
Server 2008
• Red Hat Linux, SuSE Linux, Miracle Linux, Fedora Core, Linux open
source driver (32/64-bit)
• FreeBSD, FreeNAS, VMware ESX 3.x, 4.x